• SRT 24HX1001

  • SRT 24HY1003W

  • SRT 24HY4003

  • SRT 24HZ4003N


SRT 24HX4003

Celebrating STRONG’s X400 TV generation

The X400 series stands for an awakening in LED TV technology. Viewers enjoy sharp images in high resolution paired with user-friendliness. EPG, favourite channel list and the personal channel editor enable an individually tailored entertainment system – available with triple tuner. The exclusive image processing and optimization does the rest.

Product overview

  • Built-in DVB-T/T2/C/S/S2 tuner
  • USB for multimedia
  • 100 Hz Image Quality Ratio
  • Exceptional contrast and realistic pictures
  • CI+ slot for conditional access to Pay TV
  • Radiant colours and broad colour spectrum
  • Sharpness and fluidity to moving images
  • Electronic Programme Guide (EPG)
  • Favourite channel lists
  • Parental control
  • Teletext
     Built-in DVB-T/T2/C/S/S2 tuner for Free-To-Air TV and radio programmes via terrestrial antenna, satellite or cable(1)
     USB port for playback of various multimedia files(2)
     100 Hz Image Quality Ratio
     CI+ slot for conditional access to Pay TV
     Radiant colours and broad colour spectrum
     Sharpness and fluidity to moving images
     Electronic TV Programme Guide (EPG) for on screen programme information of present/following events(3)
     Booking of timers directly through the EPG
     Favourite list for storing channels in your preferred order
     Parental control for channels(3)
     Teletext, multi-lingual subtitling and audio track support(3)
     User-friendly remote control
     Various settings for picture and sound modes
     Different channel edit options (skip, rename, delete, move, add to favourite list)
     5 V antenna power supported
     Software updates Over-The-Air
     Low power consumption in standby
     Multi-lingual on screen menu (OSD)
     Exceptional contrast and realistic pictures
     Connectors: AIR/CABLE, LNB, 2 x HDMI, TV SCART, headphones, USB, CI+ slot, main power cable
     Accessories: Remote control, main power cable, 2x base (feet), 4x PM4X14 screws
    (1) Depending on local signal conditions
    (2) STRONG cannot guarantee the playback of files although extensions are listed, as it depends on the codec, bit rate and resolution
    (3) Availability depending on broadcast
    Resolution1366x768 (HD)
    Image Quality Ratio (IQR)100 Hz
    Frequency60 Hz
    Panel brightness (cd/m²)>165 nits
    Contrast ratio2000:1
    Response time typ. (in ms)8,5
    USB multimediaavailable
    Favourite channel listavailable
    Channel editoravailable
    Parental controlavailable
    Sat: DiSEqC 1.0available
    ANT in (IEC terrestrial/cable)available
    SAT in (F Sat)available
    CI slot1
    Sound typeStereo, Mono L/R
    Screen size (cm/inch)61/24"
    Size (WxDxH) in mm554 x 131.5 x 371
    Size (WxDxH) in mm (without stand)554 x 66 x 337
    Weight in kg2.20
    Weight without stand in kg2.15
    Power consumption working (max./typ.)40W/25W
    Energy efficiency classA
    Fixed standavailable
    Wall-mount VESA size in mm (not included)75x75
    Power consumption in standby<0.5W
    * DVB-C is only available in certain countries and for certain operators. For certain operators, a subscription and conditional access are necessary. For more information, please contact your operator.
    **Availability depending on broadcast

    Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Manufactured under license from Dolby Laboratories. Dolby Audio and the double-D symbol are registered trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. All product names are trademarks or registered trademarks of their respective owners.
    © STRONG 2015. All rights reserved.


    Possible cause and solution

    No picture,no sound

    1. Check if the fuse or circuit breaker is working.
    2. Plug another electrical device into the outlet to make sure it is working or turned on.
    3. The power plug is in bad contact with the outlet
    4. Check the signal source.

    No colour

    1. Change the colour system.
    2. Adjust the saturation.
    3. Try another channel. Black-white programme may be received.

    The remote control does not work

    1. Change the batteries.
    2. The batteries are not installed correctly.
    3. Main power is not connected.

    No picture, normal sound

    1. Adjust the brightness and contrast.
    2. Broadcasting failure may happen.

    Normal picture, no sound

    1. Press the volume up button to increase the volume.
    2. The volume is set to mute, press [MUTE] to restore the sound.
    1. Change the sound system.
    2. Broadcasting failure may happen.

    Unorderly ripples on the picture

    It is usually caused by local interference, such as cars, daylight lamps and hair driers. Adjust the antenna to minimize the interference.

    Snowy dots, blocking and interference

    If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots, show blocking or break-ups. When the signal is extremely weak, it may be necessary to install
    a special antenna to improve the reception.

    1. Adjust the position and orientation of the indoor/outdoor antenna.
    2. Check the connection of the antenna.
    3. Fine tune the channel.
    4. Try another channel. Broadcasting failure may happen.


    Ghosts are caused by the television signal following two paths. One is the direct path, the other is reflected from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception.

    Radio frequency interference

    This interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source.

    Playback of video (or Timeshift) is causing picture freeze/macro blocks or similar distortion, especially on HD content.

    Read/write speed of your USB device could be too low. Make sure to use a USB storage device with sufficient speed and space. Pen drives (USB sticks) may not support sufficient speed.

    No signal or weak signal, intermittent reception.

    1. Cables might have loosened; moisture might have entered into cables or connectors, heavy rain at present or heavy storm at present.
      Check the cable connections, LNB and other equipment connected between the LNB and the receiver, or peak the dish.
      Wait for rain/storm to subside. Ask a local satellite specialist for advice.
    2. The satellite dish is not pointing at the (correct) satellite(s).
      Adjust the dish. Ask a local satellite specialist for advice.
    3. Satellite dish is too small, trees or buildings in path.
      Change to a larger dish or change position of dish.
    4. Signal is too strong, dish is oversized.
      Connect a signal attenuator to the LNB input. Ask a local satellite specialist for advice.

    Bad picture / blocking error during heavy rain.

    Heavy rain will attenuate satellite signals, below a certain level blocking will occur.
    Make sure your dish installation is up to standards to minimize rain effects. When in doubt, ask a local satellite specialist for advice.

    ANGA 2017
    www.strong-connected.com              www.thomsonstb.net