SRT 82 - SW v1.5.0 - 12. 6. 2020
Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the instructions carefully before you load the firmware into your receiver! The zip file consists of:
1) Firmware: upgrade_app_with_mboot_CL_BD_MST297B_D01A_344G_82.bin
2) Release notes
3) Update Instruction:
a) At the PC:
Extract the .bin file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver.
b) At the Receiver:
Switch ON your receiver and connect the USB device with the software file (in the root directory) to the USB connector on the Y-cable at the receiver.After the USB device has been successfully detected, you can perform the software update according to the following steps:
1. Press MENU button to enter Main Menu. Select System with the ◄► buttons and use ▲▼ to select Software Update then press OK to open this menu.
2. Now select USB Upgrade with ▲▼ and press OK.
3. After the update file has been detected correctly and successfully, the filename will be displayed. Use ▲▼ to select it and press OK to start the update process.
4. Now the receiver will reboot to “Upgrading…” screen with blue background. Please wait patiently until the receiver finished!
Poznámky k vydání
SW Version 1.5.0 from 20.04.2020
Following improvements were realised in this software version:
- Italia LCN scan process has been improved
- France LCN scan process has been improved
- Added support for BT2020 colour space
NEVER disconnect the USB device from the receiver, the receiver from the main or switch OFF power during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically!
With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!