SRT 2023 - SW_v7.1.838 - 2/28/2019
Here you can download the new software for your Android box.
Please DO NOT
uncompress the downloaded zip file and read the instructions carefully
before you load the software into your Android box!
The complete Update instruction as PDF file can be downloaded here...!
a) At the PC:
1. Connect a USB stick /pendrive to your PC with at least 600MB free memory capacity!
2. Download the .zip file into the root directory of the connected USB device.
3. Then disconnect the USB device from the PC and connect it to the Android box.
b) At the Android box:
After the USB device has been detected successfully, you can perform the software update according to the following steps:
1. Go down to the main menu by using
the ▼ button and then use the ◄► buttons or the air mouse to select All
APPs and press OK to access.
2. Use the ◄► and ▲▼ buttons or the air mouse to select Update Application and press OK to open it.
3. Use ▼ button to select Local Update and press OK.
4. All available USB devices will be shown now. Press OK on the
appropriate USB and press OK on the displayed .zip file start the update
(please check the correct model number). The Update procedure may take several minutes, so please wait patiently! During
the software update the unit will reboot; “Shut down" and "Installing
system update…" will be displayed. Previously installed APPs and
settings will be kept.
Software Version 7.1.838 from 21.12.2018
Following improvements were realised since the previous software version:
• Receiver responds to commands from RCU (Remote control unit) also in recovery mode of the device.
NEVER disconnect the USB device from the Android box, the Android box from the main or switch OFF power during the update procedure. It can damage your Android box and warranty will void! As soon as the update has been finished, the Android box restarts automatically within the „Main Menu“!
With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!