Software


SRT 24HA3003 (24"/60 cm) - SW_v101218 - 12/12/2018

Contents

 

 

Dear customer!

 

Here you can download the latest software for your TV in a compressed package. Please unzip the zip file and read the instructions carefully before installing the software on your television.

The Zip file consists of:

1) Software: "MSD3663_S_OB33510_57.bin"

2) Release Notes

3) Update instructions:

a) On the PC:

Copy the .bin file into the root directory of the USB device and then disconnect it from the PC.

b) Procedure on the TV:

Switch on your TV and connect your USB storage device with the software to the USB port on the back.

Then proceed as follows:

  1. Press the MENU button and use the ▲▼ buttons to select the Setting (gear icon) Menu and press OK to open.
  2. Now use the button to select the Software Update (USB) Menu and press OK to open.
  3. Use the button to select Yes to start the update process. If your USB device has not been detected, a message will be displayed. If this happens, please use another USB device to perform the update!
  4. As soon as the update is started, the progress is displayed in %. Please wait until the update is finished!
  5. As soon as the TV has completed the update process, the message "Successful! Restart the TV".
  6. Please now disconnect the television's power cable from the power supply and reconnect it after about 10 seconds. The Software update is now complete.

 

Release notes

24HA3003_101218SW Version

 

 

The following improvements have been implemented:

 

 

•      Fixed an issue where the 22 KHz switch was activated at 11.560 MHz instead of 11.700 MHz.

 

•      Fixed an issue where the LNB settings were not reset to default after the factory reset.

 

 

 

 

 

 

By downloading this software you confirm that STRONG cannot be held liable in any way for direct or indirect damages resulting from the use of this software!



Attention

Attention


Please NEVER disconnect the power supply or turn off the TV during the software update process! This may destroy the TV and void the warranty! As soon as the update is finished the TV starts again!

By downloading this Software, you confirm that STRONG cannot be held liable in any way for direct or indirect damages resulting from the use of this software!

SW_v101218