Products  |  

SRT 7502

HD satellite receiver for superb TV moments

Enjoy a great variety of programmes with SRT 7502 – an exclusive HD satellite receiver for Skylink, the largest Pay-TV provider in the Czech Republic and Slovakia! Many convenient features such as the Fast Scan Table (FST) function for fast finding and installing of your favourite programmes, playback of multimedia files stored on an external USB device, a 14-day Electronic Programme Guide, 8 different favourite lists and booking of events via timer. The best choice for the multifaceted experience of Skylink.

 
 
SRT 7502

Product overview

  • HD receiver for digital FTA programmes via satellite
  • Smartcard reader for Skylink and CS Link channels
  • Fast Scan Table (FST)
  • Booking and editing of timers directly in the EPG
  • USB: recording, timeshift, multimedia, software updates
  • Dolby® Digital Plus
  • Max. 4000 channels memory capacity
  • Electronic TV Programme Guide (EPG)
  • 8 Favourite lists for TV and radio channels
  • Parental control for locking channels

 

 
HDTV receiver for Irdeto encrypted and Free-To-Air TV and radio programmes via satellite (1)
 
Smartcard reader for watching encrypted Skylink and CSlink channels (2)
 
Fast Scan Table (FST) function for installing a complete channel bouquet in a couple of seconds
 
USB port: record TV programmes, play multimedia files, update receiver software via USB storage device (3)
 
Dolby® Digital Plus (4)
 
4000 channels memory capacity
 
Electronic TV Programme Guide (EPG) for on screen programme information of present/following event information up to 14 days (5)
 
Booking of events directly from EPG
 
Timer functions for watching events
 
Videotext, multi-lingual subtitling and audio track support (5)
 
6 favourite lists for TV and 2 favourite lists for radio programmes
 
Parental Control
 
Latest satellite and transponder data implemented
 
Digital sound through coaxial output (S/PDIF) by connecting to digital amplifier
 
Energy saving automatic standby function
 
Standby control via front button
(1) Depending on local signal conditions
(2) Precondition is an activated and valid Irdeto smartcard (AT)
(3) STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on file size, codec, bit rate and resolution
(4) Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
(5) Availability depending on broadcaster
RECEPTION
ReceptionDVB-S2
Free-To-Airavailable
PayTVSkylink, CSlink
HDMIavailable
Smart Card Slotavailable
PROPERTIES
Channel memory capacity4000
Favourite lists8
Electronic Programm Guide (EPG)available
Booking of events via EPGavailable
Timersavailable
Software updateUSB
Videotextavailable
Multiliungual subtitling and audio track supportavailable
Parental controlavailable
Automatic standby functionavailable
USB
USB multimediaavailable
USB recording / Timeshiftavailable
VIDEO
Aspect ratio4:3 and 16:9, Pan & Scan, Letterbox, Full screen combined
Video resolution"Scart: 576i, CVBS/RGB
AUDIO
Audio modeMono L/R, Stereo, Dolby Digital Plus*
Dolby available
TUNER
LNB power13/18 V DC (+/- 1 V), max. 500 mA, overload protected
DiSEqC Version1.0, 1.1, 1.2, GOTO X
CONNECTORS
TUNER INavailable
HDMIavailable
SCARTavailable
Digital audio S/PDIFavailable
USBavailable
IR-connectionavailable
GENERAL DATA
Supply voltage100 - 240 V AC 50/60 Hz
Power consumptionmax. 18 W, typ. 7 W
Power consumption in standbymax. 0.5 W
Size (W x D x H) in mm170 x 128 x 39
Net-weight in kg0,36
ACCESSORIES
Batteriesavailable
Remote controlavailable
Installation Instructionsavailable
Power adapteravailable
EAN
Code8717185449396
*Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories

STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC

Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Dolby Audio, Dolby Digital, Dolby Digital Plus, Dolby and the double-D symbol are registered trademarks of Dolby Laboratories, ASTRA is a registered trade mark of SES ASTRA, Irdeto is a registered trade mark of Irdeto Access B.V., HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries, Skylink® and CS Link® are trademarks which M7 Group S.A. uses under license. All other product names are trademarks or registered trademarks of their respective owners.

The power adapter is not plugged in.
Check that the power adapter is plugged into the wall outlet.
  1. Wrong input selected/ bad connection or cable. Connectors are not fully inserted.
  2. TV power OFF.
  1. Check that the correct TV input is selected. HDMI inputs for most TV
    screens are not automatically switched to the correct HDMI input.
    Make sure the connectors are properly connected to the TV and receiver.
  2. Turn ON the TV.
Audio is muted on the TV or the receiver.
Press [MUTE] or [UP] on the TV or the receiver remote control.
Audio and video are disturbed and do not run smoothly on some channels.
This can be frequency dependent.
Interfering devices are too close to the receiver.
Such devices can be a microwave, mobile phones or other radiating devices.
Switch OFF the suspected device or move it futher away.
The HDMI resolution is too high for the used TV screen.
Connect your receiver temporarily with a SCART cable to see the menu
again and change the HDMI resolution to a lower value.
  1. The receiver can’t receive the signal.
  2. Incorrect values of some tuner parameters.
  1. The weather is very bad and the satellite signals are temporary blocked.
    The satellite dish is misaligned or distorted.
    Check the antenna cable, replace the cable, or connect the cable tightly to the receiver.
    Check in the menu if you have both good signal and quality levels.
    Trees grow between the dish and satellite position (the sky must be 100% clear)
  2. Set the values of the tuner parameters correctly in the menu {Installation -- Antenna Setup/Channel Search}. Helpful websites are: http://de.kingofsat.net/
    http://www.lyngsat.com/
  1. Expired subscription.
    Smartcard awaiting new authorisation.
    No subscription for the selected channel.
  2. The card is wrongly inserted
  3. Another smartcard is used.
  1. Check your current subscription status in {Conditional Access --
    Irdeto CA System --Service Status} together with your service
    provider.
    If the receiver was powered off/disconnected from the
    signal for a longer time it can take ~1-2h until a valid card is
    activated again.
    Switch to another channel.
  2. Insert the smartcard with the golden chip down and forwards into the reader slot.
  3. Insert the correct smartcard type or check with the operator if the smartcard married function is switch on.
The batteries of the remote control are not inserted, wrongly inserted or exhausted.
Fluorescent lamps are disturbing the remote IR signal.
The distance or angle between the remote control and the receiver is too far or too wide.
Check whether the batteries are inserted correctly or exhausted, if so replace the batteries in the remote control.
Switch OFF the suspected lamp.
Try a smaller distance or angle between the remote control and the receiver.
Formatted incorrectly.
An HDD with too much folders or partitions is connected.
USB 1.1 device connected.
Format the USB device by the receiver in the menu {Storage ~Storage Device setup}.
HDDs from above 500 Gb or HDDs with more partitions might need longer time to be detected.
The receiver might not work properly with such an USB
device or can’t guarantee functionality with all available USB
devices.
The Auto Standby function is activated and reached the adjusted time (default 3h).
In the menu {System} you can adjust the Auto Standby time or disable it.
Playback of recordings made on (another) receiver is not possible.
Based on license reasons and rights, playback is possible only on the receiver on which the recording was made.
Time shift / Instant recording is set to ON.
Select in DVR setup menu the Time shift Status to Disabled.
MR PIN code is not accepted.
The operator can change the playback PIN code on smartcards.  (Maturity Rate PIN). Please, contact your operator.