Xmas

Universal Repeater 300

Do you have trouble getting solid Wi-Fi signals in some parts of your home?

STRONG’s Universal Repeater 300 is the perfect solution to extend the coverage of your 802.11n modem or router in just minutes. At a maximum speed of 300 Mbit/s, the Universal Repeater 300 is a very compact wall plug solution designed for an extremely convenient placement.

The system of 2 adjustable external antennas combined with a smart LED System for an optimum positioning of the repeater will boost a wide and reliable Wi-Fi coverage throughout your home.

The Universal Repeater 300 can also be configured as an outstanding 802.11n Access Point or Router to immediately improve the Wi-Fi of your existing single band modem without exchanging it by a new one.

 
 
Universal Repeater 300

Product overview

  • 802.11n Wi-Fi standard
  • Speed up to 300 Mbit/s
  • Supports 802.11n/b/g standards
  • 300 Mbit/s @ 2.4 GHz
  • Universal Repeater/Access Point/Router operational modes
  • Works with any standard modem or router
  • WPA/WPA2 for the highest level of Wi-Fi security
  • Smart LED system for an optimum positioning of the repeater
  • 2x adjustable external antennas for maximum coverage and reliability
  • Connect & Secure button: easy setup and maximum network security
360° view

802.11n Access Point

The Universal Repeater 300 can also be configured as an outstanding 802.11n Access Point or Router to immediately improve the Wi-Fi of your existing single band modem without exchanging it by a new one.

Wi-Fi performance

  • 802.11n Wi-Fi standard
  • Speed up to 300 Mbit/s
  • Supports 802.11n/b/g standards
  • 300 Mbit/s @ 2.4 GHz
  • Universal Repeater/Access Point/Router operational modes
  • Works with any standard modem or router

Coverage & Reliability

  • 2x adjustable external antennas for maximum coverage and reliability
  • Smart LED system for an optimum positioning of the repeater

Security

  • WPA/WPA2 for the highest level of Wi-Fi security
  • Connect & Secure button for an easy set up and a maximum network security
  • Power on/off switch

Connections

  • 1x Ethernet LAN port to connect any computer, set-top-box, Smart TV, game console, …
  • 1x Ethernet WAN/LAN port to connect to modem for Access Point/Router use
  • Ethernet WAN/LAN port can be used as a second LAN port in Repeater mode
WI-FI
Frequency2.4 GHz
StandardsIEEE 802.11n/g/b
Signal RateUp to 300 Mbit/s
SecurityWEP, WPA-Personal, WPA2-Personal, WPA-Personal/WPA2-Personal mixed mode
Antenna2x 3 dBi omnidirectional, adjustable
Transmit PowerEurope: <20 dBm (2.4 GHz)
Supported Channels1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
FeaturesEnable/Disable, Client Isolation
HARDWARE
Ethernet Ports1x 10/100 Mbit/s LAN port (Auto MDI/MDIX)
ButtonsPower On/Off, Operation mode selector (Repeater/Access Point/Router), Connect & Secure, Reset
LEDsPower/Connect & Secure, 3 x Wi-Fi Smart LEDs, WAN, LAN
PowerInternal, 100-240 V, 50/60 Hz, 0.1 A
StandardsIEEE 802.11n/g/b, IEEE 802.3, IEEE 802.3u
SOFTWARE
Configuration WizardsRepeater, Router, Access Point
WAN TypeDynamic IP, Static IP, PPPoE
DHCPAuto, Server, Client
ManagementWeb User Interface, Time Settings, Configuration Backup/Restore, Firmware Upgrade
Internet ProtocolIPv4
OTHER SPECIFICATIONS
CertificationCE
Package contentsUniversal Repeater 300
Ethernet Cable
Installation instructions
Warranty Card
System requirementsWindows 7, 8, 8.1, 10, Mac OS X, Linux, Internet Browser
EnvironmentOperating temperature: 0° C ~ +40° C
Storage temperature: -10° C ~ +70° C
Dimensions (WxDxH) in mm81 x 83 x 147
Weight0.13 kg
EAN9120072370748
In consequence of continuous research and development technical specifications, design, picture and appearance of products may change without notice. STRONG shall not be responsible in any manner relating to the logos, brands and/or trademarks displayed herein which are not registered by STRONG. All product names are trademarks or registered trademarks of their respective owners. Wi-Fi is a registered trademark of Wi-Fi Alliance®.
Data throughput, distance, signal range, and coverage area per m² are used only for reference and based on performance test results under normal use case conditions. Actual performances are not guaranteed and may vary due to differences in operating environments, distance and positioning of the products, mix of products used, building materials, wireless and electrical interferences and other adverse conditions.
There are two options to connect a device to Universal Repeater 300 for the installation;
Use a Laptop or a PC and connect it to Universal Repeater 300 with an RJ45 Ethernet cable.
Wi-Fi connection to Universal Repeater 300. The factory default Wi-Fi network name is STRONG_2.4GHz and there is no password.
You can change all the settings by the web management interface embedded in the product. The URL of the web management interface is http://strong.ap300
For installation only, please use http://192.168.10.1  to access to web management interface.
Before the installation, default IP address of Universal Repeater 300 is 192.168.10.1.
After the installation, Universal Repeater 300 obtains its IP address from your router. Please login to the management interface of your router and check the IP address that is assigned to your Universal Repeater 300.
Please connect your PC/laptop to Universal Repeater 300 with an Ethernet cable and type the IP address of Universal Repeater 300 to the address bar of your web browser to access the web management interface of your Universal Repeater 300.
After the installation, Universal Repeater 300 obtains its IP address from your router. Please login to the management interface of your router and check the IP address that is assigned to your Universal Repeater 300.
Universal Repeater 300 might be located too far away from your modem/router. It is recommended to put it in the same room with the modem/router for the installation, and then you can move it to another place by checking that at least 2 of the Wi-Fi signal LEDs are still green.
Please place your Universal Repeater 300 in the middle, between your Gateway/Router and the location that lacks Wi-Fi coverage where there are at least 2 of the Wi-Fi signal LEDs are green.
Yes. Please follow the Repeater Wizard during the installation. You can also change the Wi-Fi network name by “Basic Settings” menu on the web management interface after the installation.
Please ensure that the Mode Selection switch at the side panel of your Universal Repeater 300 is at Access Point mode.

Do a factory reset by keeping pressed the “Reset” button for 6 seconds if your product is configured as a Repeater or Router earlier.

Connect your modem/router by an RJ45 Ethernet cable to the WAN/LAN port of the Universal Repeater 300.

Connect your Wi-Fi device to one of the default Wi-Fi network (STRONG_2.4GHz) provided by Universal Repeater 300. There is no password for the default Wi-Fi network.

Login to the web management interface of Universal Repeater 300 by the URL http://strong.ap300 , click on “AP Wizard” and follow the steps.
Please ensure that the Mode Selection switch at the side panel of your Universal Repeater 300 is at Router mode.

Do a factory reset by keeping pressed the “Reset” button for 6 seconds if your product is configured as a Repeater or Router earlier.

Connect your modem/router by an RJ45 Ethernet cable to the WAN/LAN port of the Universal Repeater 300.

Connect your Wi-Fi device to one of the default Wi-Fi networks (STRONG_2.4GHz and STRONG_5GHz) provided by Universal Repeater 300. There is no password for the default Wi-Fi networks.

Login to the web management interface of Universal Repeater 300 by the URL http://192.168.10.1 , click on “Router Wizard” and follow the steps.
Universal Repeater 300 is a single band 2.4GHz device.
Universal Repeater 300 can create a connection to your modem/router on 2.4GHz band and it repeats the Wi-Fi signal of your modem/router on 2.4GHz.
Yes, you can change the channel of the Wi-Fi band that is not being used for the communication between your modem/router at “Basic Settings” menu on the web management interface.
No. Universal Repeater 300 can only repeat one Wi-Fi network. You need to select the Wi-Fi network that you want to extend during the installation of Universal Repeater 300.
Yes, you can, but you need to allow the MAC addresses (MAC Address and 2.4 GHz BSSID) of Universal Repeater 300 at the MAC address filtering settings of your router. The MAC addresses (MAC Address and 2.4 GHz BSSID) of Universal Repeater 300 can be found at the “Device Status” section on its web management interface (http://strong.ap300)
No. Wi-Fi devices that are connected to Universal Repeater 300 communicate to your modem/router by using the MAC addresses of Universal Repeater 300.
Please keep the Reset button gently pressed (for instance using a paperclip) at the back panel of your Universal Repeater 300 until the LEDs get flashing.
Please move your Universal Repeater 300 to a closer location to your modem/router to have a better performance.
Repeaters can improve the Wi-Fi coverage, performance and connectivity locally but the broadband Internet speed is defined by your subscription of your Internet Service Provider.