SRT 7502
HD satellite receiver for superb TV moments
Enjoy a great variety of programmes with SRT 7502 – an exclusive HD satellite receiver for Skylink, the largest Pay-TV provider in the Czech Republic and Slovakia! Many convenient features such as the Fast Scan Table (FST) function for fast finding and installing of your favourite programmes, a 14-day Electronic Programme Guide, 8 different favourite lists and booking of events via timer. The best choice for the multifaceted experience of Skylink.
Product overview
- HD receiver for digital FTA programmes via satellite
- Smartcard reader for Skylink and CS Link channels
- Fast Scan Table (FST)
- USB: recording, timeshift, software updates
- Electronic TV Programme Guide (EPG)
- Booking and editing of timers directly in the EPG
- 8 Favourite lists for TV and radio channels
- 4000 channels memory capacity
- Parental control for locking channels
- Dolby® Digital Plus
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
HDTV receiver for Irdeto encrypted and Free-To-Air TV and radio programmes via satellite (1)
Smartcard reader for watching encrypted Skylink and CSlink channels (2)
Fast Scan Table (FST) function for installing a complete channel bouquet in a couple of seconds
USB port: record TV programmes, update receiver software via USB storage device
Electronic TV Programme Guide (EPG) for on screen programme information of present/following event information up to 14 days (3)
Booking and editing of timers directly in the EPG
6 favourite lists for TV and 2 favourite lists for radio programmes
4000 channels memory capacity
Timer functions for watching events
Parental lock function for menu
Teletext with selection of sub-pages via remote control(3)
Multi-lingual subtitling and audio track support(3)
Latest satellite and transponder data implemented
Dolby® Digital Plus (4)
Digital sound through coaxial output (S/PDIF) by connecting to digital amplifier
DiSEqC 1.0, 1.1, 1.2 and Goto-X and SatCR supported
Standby control via front button
Power saving automatic standby function
Connectors: SAT IN, IR, S/PDIF coaxial, HDMI, TV SCART, USB port (front), power supply
Accessories: Remote control, 2x AAA batteries, power adapter
(1) Depending on local signal conditions
(2) Precondition is an activated and valid Irdeto smartcard (AT)
(3) Availability depending on broadcaster
(4) Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
(2) Precondition is an activated and valid Irdeto smartcard (AT)
(3) Availability depending on broadcaster
(4) Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
| RECEPTION | |
|---|---|
| Reception | DVB-S2 |
| Free-To-Air |  |
| PayTV | Skylink, CSlink |
| HDMI | |
| Smart Card Slot | |
| PROPERTIES | |
|---|---|
| Channel memory capacity | 4000 |
| Favourite lists | 8 |
| Electronic TV Programme Guide | |
| Booking of events via EPG | |
| Timers | |
| Teletext | |
| Multi-lingual subtitling and audio track support | |
| Parental control | |
| Automatic standby function | |
| USB | |
|---|---|
| USB Software update | |
| USB recording / Timeshift | |
| VIDEO | |
|---|---|
| Aspect ratio | 4:3 and 16:9, Pan & Scan, Letterbox, Full screen combined |
| Video resolution | Scart: 576i, CVBS/RGB |
| AUDIO | |
|---|---|
| Audio mode | Mono L/R, Stereo, Dolby Digital Plus* |
| Dolby | |
| TUNER | |
|---|---|
| LNB power | 13/18 V DC (+/- 1 V), max. 500 mA, overload protected |
| DiSEqC Version | 1.0, 1.1, 1.2, GOTO X |
| CONNECTORS | |
|---|---|
| TUNER IN | |
| HDMI | |
| SCART | |
| Digital audio S/PDIF | |
| USB | |
| IR-connection | |
| GENERAL DATA | |
|---|---|
| Supply voltage | 100 - 240 V AC 50/60 Hz |
| Power consumption | max. 18 W, typ. 7 W |
| Power consumption in standby | max. 0.5 W |
| Size (W x D x H) in mm | 170 x 128 x 39 |
| Net-weight in kg | 0,36 |
| ACCESSORIES | |
|---|---|
| Batteries | |
| Remote control | |
| Installation Instructions | |
| Power adapter | |
| EAN | |
|---|---|
| Code | 8717185449396 |
STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Dolby Audio, Dolby Digital, Dolby Digital Plus, Dolby and the double-D symbol are registered trademarks of Dolby Laboratories, ASTRA is a registered trade mark of SES ASTRA, Irdeto is a registered trade mark of Irdeto Access B.V., HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries, Skylink® and CS Link® are trademarks which M7 Group S.A. uses under license. All other product names are trademarks or registered trademarks of their respective owners.
| Data sheet | Manual |  English  Magyar Čeština Slovenčina | English Čeština Slovenčina |
|---|
| Downloads |
|---|
The power adapter is not plugged in.
Check that the power adapter is plugged into the wall outlet.
- Wrong input selected/ bad connection or cable. Connectors are not fully inserted.
- TV power OFF.
- Check that the correct TV input is selected. HDMI inputs for most TV
screens are not automatically switched to the correct HDMI input.
Make sure the connectors are properly connected to the TV and receiver. - Turn ON the TV.
Audio is muted on the TV or the receiver.
Press [MUTE] or [UP] on the TV or the receiver remote control.
Audio and video are disturbed and do not run smoothly on some channels.
This can be frequency dependent.
This can be frequency dependent.
Interfering devices are too close to the receiver.
Such devices can be a microwave, mobile phones or other radiating devices.
Switch OFF the suspected device or move it futher away.
Such devices can be a microwave, mobile phones or other radiating devices.
Switch OFF the suspected device or move it futher away.
The HDMI resolution is too high for the used TV screen.
Connect your receiver temporarily with a SCART cable to see the menu
again and change the HDMI resolution to a lower value.
again and change the HDMI resolution to a lower value.
- The receiver can’t receive the signal.
- Incorrect values of some tuner parameters.
- The weather is very bad and the satellite signals are temporary blocked.
The satellite dish is misaligned or distorted.
Check the antenna cable, replace the cable, or connect the cable tightly to the receiver.
Check in the menu if you have both good signal and quality levels.
Trees grow between the dish and satellite position (the sky must be 100% clear) - Set the values of the tuner parameters correctly in the menu
{Installation -- Antenna Setup/Channel Search}. Helpful websites are:
http://de.kingofsat.net/
http://www.lyngsat.com/
- Expired subscription.
Smartcard awaiting new authorisation.
No subscription for the selected channel. - The card is wrongly inserted
- Another smartcard is used.
- Check your current subscription status in {Conditional Access --
Irdeto CA System --Service Status} together with your service
provider.
If the receiver was powered off/disconnected from the
signal for a longer time it can take ~1-2h until a valid card is
activated again.
Switch to another channel. - Insert the smartcard with the golden chip down and forwards into the reader slot.
- Insert the correct smartcard type or check with the operator if the smartcard married function is switch on.
The batteries of the remote control are not inserted, wrongly inserted or exhausted.
Fluorescent lamps are disturbing the remote IR signal.
The distance or angle between the remote control and the receiver is too far or too wide.
Fluorescent lamps are disturbing the remote IR signal.
The distance or angle between the remote control and the receiver is too far or too wide.
Check whether the batteries are inserted correctly or exhausted, if so replace the batteries in the remote control.
Switch OFF the suspected lamp.
Try a smaller distance or angle between the remote control and the receiver.
Switch OFF the suspected lamp.
Try a smaller distance or angle between the remote control and the receiver.
Formatted incorrectly.
An HDD with too much folders or partitions is connected.
USB 1.1 device connected.
An HDD with too much folders or partitions is connected.
USB 1.1 device connected.
Format the USB device by the receiver in the menu {Storage ~Storage Device setup}.
HDDs from above 500 Gb or HDDs with more partitions might need longer time to be detected.
The receiver might not work properly with such an USB
device or can’t guarantee functionality with all available USB
devices.
HDDs from above 500 Gb or HDDs with more partitions might need longer time to be detected.
The receiver might not work properly with such an USB
device or can’t guarantee functionality with all available USB
devices.
The Auto Standby function is activated and reached the adjusted time (default 3h).
In the menu {System} you can adjust the Auto Standby time or disable it.
Playback of recordings made on (another) receiver is not possible.
Based on license reasons and rights, playback is possible only on the receiver on which the recording was made.
Time shift / Instant recording is set to ON.
Select in DVR setup menu the Time shift Status to Disabled.
MR PIN code is not accepted.
The operator can change the playback PIN code on smartcards. (Maturity Rate PIN). Please, contact your operator.