Wi-Fi Mesh Home Kit 1600 Add-on

Utvidga ditt Wi-Fi nätverk!

Mesh Extender 1600 kan användas som tillägg till Wi-Fi Mesh Home Kit 1600 och ger upp till 100 m² extra täckning av ett super-snabbt och smidigt roaming Wi-Fi-nätverk med en hastighet upp till 1600 Mbit/s. Du kan ansluta upp till 6x Mesh Extender 1600 tillsammans för att täcka upp till 800 m² över flera våningar med Wi-Fi som helt enkelt fungerar! Den inbyggda Mesh-teknologin kombinerad med den kraftfulla 802.11ac Wi-Fi-standarden ger optimal hastighet, täckning och anslutning till ditt hemnätverk.

Mesh Extender 1600 kan alternativt användas som en utmärkt fristående enhet på två olika sätt: Som en 802.11ac dual band åtkomstpunkt med en hastighet upp till 1600 Mbit/s för att omedelbart förbättra Wi-Fi på ditt befintliga enkelbandsmodem utan att ändra modemet. Eller som en universell dual band repeater för att på några minuter fördubbla täckningen av ditt befintliga 802.11ac modem eller router med en hastighet på 1600 Mbit/s.

 
 
Wi-Fi Mesh Home Kit 1600 Add-on

Produktöversikt

  • Tilläggsenhet för Wi-Fi Mesh Home Kit 1600
  • Ingyggt Mesh
  • Endast ett Wi-Fi-namn över hela hemmet
  • Intelligent roaming
  • Ethernet backhaul
  • Automatisk mjukvaruuppdatering
  • Smart LED-system för optimal placering
  • Enkel inställning
  • Tillgångspunkt/Repeater-konfiguration
  • AirPlay® kompatibel
 
360° view

Wi-Fi prestanda

  • 802.11ac Wi-Fi standard
  • Hastighet upp till 1600 Mbit/s
  • Dual band samtidigt
  • 300 Mbit/s @ 2.4GHz + 1300 Mbit/s @5 GHz
  • Mesh/Åtkomstpunkt/Repeater driftlägen
  • Fungerar med alla standardmodem eller router

Täckning & Stabilitet

  • Mesh-teknologi inuti för maximal täckning, prestanda och anslutningsmöjligheter
  • Intelligent roaming i Mesh-konfiguration
  • Ger upp till 100 m² extra täckning
  • Upp till 6x Mesh Extender 1600 för att täcka upp till 800 m² på flera våningar
  • Connect & Secure-knapp (WPS) för en enkel Mesh-konfiguration

Säkerhet

  • WPATM/WPA2TMför högsta nivå av Wi-Fi säkerhet
  • Connect & Secure-knapp (WPS) för att enkelt ansluta dina Wi-Fi-enheter till ditt Wi-Fi Mesh-nätverk
  • Automatisk mjukvaruuppdatering

Anslutningar

  • 2x Ethernet Gigabit portar för anslutning till alla PC, set-top-box, Smart TV, spel konsoler, …
  • 1x USB 3.0-port för multimediafiler och skrivardelning
  • 1x analog ljudport AirPlay® kompatibel för att dela din musik
WI-FI
Frekvens2.4 GHz och 5 GHz samtidigt
StandardIEEE 802.11ac/n/g/b/a, IEEE 802.11d, IEEE
802.11h, IEEE 802.11e, IEEE 802.11i
Signalhastighet5 GHz: Upp till 1300 Mbit/s
2.4 GHz: Upp till 300 Mbit/s
SäkerhetWPA2-Enterprise, WPA2-Personal, WPA-Enterprise, WPA-Personal
Antenn5x intern
SändningseffektEuropa: <20 dBm (2.4 GHz), <23 dBm (5 GHz)
Kanaler som stöds5 GHz: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112
2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
FunktionerTilläggsenhet för Wi-Fi Mesh Home Kit 1600
Inbyggt Mesh
Flera åtkomstpunkter arkitektur upp till 6x Mesh
Ett Wi-Fi-namn
Intelligent roaming
Ethernet backhaul
Automatisk mjukvaruuppdatering
Smart LED-system för optimal placering
Enkel inställning
Tillgångspunkt/Repeater fristående konfiguration
HARDWARE
CPU800 MHz
Ethernet-portar2x 10/100/1000M LAN port (Auto MDI/MDIX)
USB port1x USB 3.0 port
Ljudport1x 3.5 mm analog
KnapparConnect & Secure (WPS), Reset (återställ)
LEDsStröm, 2.4GHz, 5GHz
StrömExtern strömförsörjning, 12 V/1,5 A DC
StandardIEEE 802.11ac/n/g/b/a, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
MJUKVARA
Multiple SSID4x 2.4GHz + 4x 5GHz
IPTV ReadyQoS, WMM, IGMP
UPnPUniversal Plug & Play Internet Gateway Device
USBSamba, DLNA Media Server, Print Server
LjudAirPlay® kompatibel
ManagementAuto Firmware Upgrade, Web User Interface, Time Settings, Configuration Backup/Restore, Firmware Upgrade, System Log
Internet ProtocolIPv4
ÖVRIGA SPECIFIKATIONER
CertifieringCE
Förpackningsinnehåll1x Mesh Extender 1600
1x Nätaggregat (12 V/1.5 A DC)
1x CAT5E Ethernet-kabel
Installationsanvisningar, garantikort
SystemkravFör trådlös användning: Apparater som är kompatibla med 5 GHz eller 2,4 GHz
För trådbunden användning: Apparater med Ethernet-port
För webb-UI-åtkomst och inställning: Alla webbläsare
Mått (B x D x H)41.5x108.5x100 mm
Vikt185 g
EAN9120072370991
Till följd av kontinuerlig forskning och utveckling kan tekniska specifikationer, design, bild och utseende ändras utan förvarning. STRONG ansvarar inte på något sätt för de logotyper, varumärken och/eller varumärken som visas häri som inte är registrerade av STRONG. Alla produktnamn är varumärken eller registrerade varumärken som tillhör respektive ägare. Wi-Fi, WPA2, WPA är registrerade varumärken som tillhör Wi-Fi Alliance®.
Datagenomströmning, avstånd, signalområde, och täckningsområde per kvadratmeter används endast för referens och baserat på prestation testresultat vid normal användning tänkbara förhållanden. Prestanda kan inte garanteras och kan variera beroende på skillnader i driftsmiljöer, avstånd och placering av produkter, blandning av produkter som används, byggmaterial, trådlösa och elektriska störningar och andra ogynnsamma förhållanden.
Please refer to the Mesh Home Kit 1600 Add-on quick installation guide, here…
Please refer to the Mesh Home Kit 1600 Add-on quick installation guide, here…
If you haven’t changed any settings after the installation, the Wi-Fi network name and password of your Mesh network is same as of the Mesh Home Kit 1600 unit that is connected to your router/modem by an Ethernet cable and printed on the product label on the bottom of the product. Alternatively, you can find the Wi-Fi network name and password of your Mesh network in the Quick Installation Guide of your original Mesh Home Kit 1600.
All of the Mesh Home Kit 1600 units are identical. There is no master and slave configuration and you can connect any of them to your modem/router and any of them to your devices with an Ethernet port.
The maximum number of Mesh Home Kit 1600 units that can be used in a STRONG’s Mesh network is limited to six.
  • Do not place the second unit too far away or too close (minimum 3 meters). Make sure that there are maximum two walls or one floor between the Mesh Home Kit 1600 units.
  • Take advantage of openings that can provide an unobstructed path between units (corridors, stair cases, doors, atriums, kitchen pass through windows, etc.).
  • If the Mesh Home Kit 1600 units have one or more walls in between, then align them vertically and horizontally as much as possible.
  • Position the Mesh Home Kit 1600 units so that the 5 GHz LED is solid green 3 minutes after being turned on. If the 5 GHz LED is red (solid or blinking), then the unit must to be positioned closer to another unit that has a solid green 5 GHz LED.
Mesh Home Kit 1600 unit scans the air to determine the best available Wi-Fi channel (to avoid interference) to use in a Mesh network after it is powered on. Also, Mesh Home Kit 1600 uses 5 GHz Wi-Fi band and it is compatible to IEEE 802.11ac with an advantage of using UNII-2 (Ch.52-64) and UNII-2-Extended (Ch.100-112) bands (known as DFS channels) in priority. According to the radio communication regulations, Mesh Home Kit 1600 Add-on runs a radar scan before it gets started to service on DFS channels. These operations take approximately 3 minutes before the Mesh Home Kit 1600 Add-on starts to service and to be fully operational.
Pairing attempt failed. Make sure the additional unit is near a unit with a green 5 GHz LED and try the Connect & Secure button again. It is safest to set up pairing when the additional Mesh Home Kit 1600 Add-on unit is in the same room as an existing operational Mesh unit. After a successful pairing, you can move the additional Mesh Home Kit 1600 Add-on unit to another area.
Mesh Home Kit 1600 unit lost the connection to your Mesh network on 5 GHz. Please ensure that all of your Mesh Home Kit 1600 units are switched on.
The 5 GHz Wi-Fi connection speed between your Mesh Home Kit 1600 units is not at its best. Please move your Mesh Home Kit 1600 Add-on unit closer to one of the other Mesh Home Kit 1600 units.
This is the normal behaviour after the Mesh links are created, no action required.
No action required, your Mesh Home Kit 1600 Add-on is being upgraded, please wait a few minutes and do not reboot the device.
Please use a laptop or a PC and connect it to any of your Mesh Home Kit 1600 units with an Ethernet cable, login to the web management interface (http://extender1600.local) and check the “Wireless Password” in the “WIRELESS > Wireless Settings” menu.
You can change all the settings by the web management interface embedded in the product. The URL of the web management interface is http://extender1600.local. Alternatively, you can also use our “STRONG Mesh” application available for free on Google Play Store and Apple App Store using a smartphone or a tablet
There is no default password, please leave the password box empty and click on OK. It is highly recommended to set a password after your first login by clicking on MANAGEMENT > Password Settings.
Please connect your PC/laptop to Mesh Home Kit 1600 Add-on with an Ethernet cable and type the IP address* of Mesh Home Kit 1600 Add-on to the address bar of your web browser to access the web management interface of your Mesh Home Kit 1600 Add-on.

*After the installation, Mesh Home Kit 1600 Add-on obtains its IP address from your router. Please login to the management interface of your router and check the IP address that is assigned to your Mesh Home Kit 1600 Add-on.
Yes, you can access the web management interfaces of your devices individually by;
1st Mesh Home Kit 1600 unit  in the network: http://extender1600.local
2nd Mesh Home Kit 1600 unit in the network: http://extender1600-2.local
3rd Mesh Home Kit 1600 unit in the network: http://extender1600-3.local
4th Mesh Home Kit 1600 unit in the network: http://extender1600-4.local
No. Please use http://extender1600.local to change the Wi-Fi network settings, the new settings will automatically be copied to all Mesh Home Kit 1600 units in the Mesh network.
Please do a factory reset on all of your Mesh Home Kit 1600 units. Connect your computer to the Mesh Home Kit 1600 unit that is connected to your modem/router with the Ethernet cable. Open the web management interface (http://extender1600.local) with a browser and change the settings. Please ensure that the new settings are operational by checking the available Wi-Fi networks list on your computer. Now, continue the installation of your Mesh network by using the Mesh quick installation guide.
  • Please check the Internet access of your router/modem. Typically, a home router/modem will have an indicator that shows the status of the Internet line, or please connect a computer to one of the Ethernet ports of your router/modem and check if there is Internet access available. If you don’t have access to the Internet, please contact your Internet Service Provider.
  • Please ensure that the Power LEDs of all the Mesh Home Kit 1600 units of your Mesh network are white solid. If the Power LED of the Mesh Home Kit 1600 unit which is connected to your router/modem is blinking white, please wait until it stops blinking and the 2.4 GHz and 5 GHz LEDs become solid green.
  • Check the Ethernet cable from the Mesh Home Kit 1600 unit connected to your router/modem. Reinsert the cable at both ends. The associated LAN port LED on your router/modem should show a live link.
  • Please restart the MESH network:
  1. Power off ALL Mesh Home Kit 1600 units
  2. Power on ALL Mesh Home Kit 1600 units and wait 3 minutes
  3. Confirm that ALL 5 GHz and 2 GHz LEDs on ALL units are green. If any unit does not have green LEDs, then carefully review the installation procedure and follow the instructions.
  • Please use different Wi-Fi devices connected to the Mesh Home Kit 1600 network and try to access to the Internet. If you have Internet access with any of your Wi-Fi devices, the configuration of your Mesh network is done properly, please check the settings of your Wi-Fi devices that cannot access to Internet or restart your devices that cannot access to the internet.
Mesh Home Kit 1600 Add-on is a dual band 2.4 GHz (300 Mbit/s) and 5 GHz (1300 Mbit/s) concurrent device.

Mesh Home Kit 1600 Add-on uses the 5 GHz Wi-Fi band and it is compatible to IEEE 802.11ac with an advantage of using UNII-2 (Ch.52-64) and UNII-2-Extended (Ch.100-112) bands (known as DFS channels) in priority.
You can create 4 different Wi-Fi networks with different passwords on 2.4 GHz and 4 different Wi-Fi networks with different passwords on 5 GHz.
Please login to the web management interface (http://extender1600.local) and open the “WIRELESS > Wireless Settings” menu. Click on the “Enabled” checkbox of the additional Wi-Fi network that you want to activate on the “WLAN 1 (2.4 GHz)” or “WLAN 2 (5 GHz)” tabs, select the “Security” type, define an enter the “Wireless Password” for this network and click on “Save”.
No. The Wi-Fi devices that are connected to the Guest Network can access to all your local network resources such as the USB and audio ports.
Yes.
Please also ensure that the MAC addresses (Ethernet MAC Address, Wireless MAC Address 1 and Wireless MAC Address 2) of Mesh Home Kit 1600 Add-on are allowed at the MAC address filtering settings of your router. The MAC addresses (Ethernet MAC Address, Wireless MAC Address 1 and Wireless MAC Address 2) of Mesh Home Kit 1600 Add-on can be found at the REPORT section on its web management interface (http://extender1600.local). If you have multiple Mesh Home Kit 1600 Add-on units in a Mesh configuration, please login to the web management interfaces of your devices individually and check the MAC addresses.
Please change the Wi-Fi channel that is being used by the Mesh Home Kit 1600. Please login to the web management interface by typing the URL to the address bar of your browser (http://extender1600.local) and change the “Channel” in the “WIRELESS > Wireless Settings” menu to any of the channels 36, 40, 44 or 48.
Ch.100-112 (UNII-2-Extended) can be used by the aviation, military etc. radars. If the Mesh Home Kit 1600 Add-on detects any radar signal between Ch.100-112, all Mesh Home Kit 1600 units  in a Mesh configuration switches to Ch.36-48 band, which is free from the radars. This operation is mandatory by the regulation law in the EU.
No. Mesh Home Kit 1600 Add-on creates a Mesh network, which is not compatible with Connection Kit 1700.
Yes.
Mesh Home Kit 1600 Add-on and Range Extender 1600 products are compatible to each other and they can work in the same Mesh network.
Mesh Home Kit 1600 Add-on has been designed to be AirPlay® compatible with a 3.5 mm analogue audio port.

Please ensure your AirPlay® compatible source device is connected to the same network as your Mesh Home Kit 1600 Add-on.

Please connect the speaker or the audio system to the audio port of Mesh Home Kit 1600 Add-on with an appropriate cable (not included in the product package of Mesh Home Kit 1600 Add-on) and select the name of your Mesh Home Kit 1600 Add-on on the list of the AirPlay® speakers on your device to stream music from your source to the audio system.
Yes, you can. There are some AirPlay® compatible streaming apps available on Google Play Store, just download and install them and enjoy the AirPlay® feature of your Mesh Home Kit 1600 Add-on.
Yes, you can. Please login to the web management interface (http://extender1600.local) of Mesh Home Kit 1600 Add-on and click on AUDIO and change the Speaker Name.

Each of the Mesh Home Kit 1600 units has got a specific AirPlay® speaker name and you can change it individually by accessing the web management interfaces of each unit;
1st Mesh Home Kit 1600 unit in the network: http://extender1600.local
2nd Mesh Home Kit 1600 unit in the network: http://extender1600-2.local
3rd Mesh Home Kit 1600 unit in the network: http://extender1600-3.local
4th Mesh Home Kit 1600 unit in the network: http://extender1600-4.local
Yes, you can transform your Hi-Fi system to a network enabled audio system with an appropriate cable (not included in the product package of Mesh Home Kit 1600 Add-on).
Yes, it works. The USB 3.0 port of Mesh Home Kit 1600 Add-on is backward compatible.
USB memory stick, USB external HDD, USB printer.

USB memory stick and External USB HDD are limited to 500GB.
Please do a refresh at Windows Explorer using for instance the F5 key on your keyboard.

If it is still not visible, please ensure that Mesh Home Kit 1600 unit recognizes the USB disk by checking the USB DEVICES section on the web management interface (http://extender1600.local).
Please make sure that your USB drive is formatted to FAT32 or NTFS.
If you use an USB external hard drive, it is recommended to connect your USB hard disk to an external power source if available.
USB memory stick and External USB HDD are limited to 500GB
Yes, please connect to the web management interface of your Mesh Home Kit 1600 Add-on and click on USB DEVICES > Network and Access Settings and change the NetBIOS Name
Yes, please connect to the web management interface of your Mesh Home Kit 1600 Add-on and click on USB DEVICES > Network and Access Settings
If you want to stream to a TV/STB/DVD player/game console, please ensure that the device has got a DLNA player. Please use this DLNA player to stream your multimedia content.

If you want to stream to a computer, please ensure that the computer has got a DLNA player installed. Typically, Windows Media Player can be used as a DLNA player to stream your multimedia content.

If you want to stream to a smart phone or a tablet, please ensure that the device has got a DLNA player installed, or download any DLNA players from the app stores by just typing DLNA in the search bar. Please use this DLNA player to stream your multimedia content.

Please ensure that your USB printer is connected to the USB 3.0 port of Mesh Home Kit 1600 Add-on.

In order to use the Printer Sharing feature you need to install a TCP/IP network printer to your operating system. When it is asked during the installation, please use the IP address of your Mesh Home Kit 1600 unit assigned by your router and the appropriate printer drivers.

For Windows, please follow the instructions below;

  1. On the Add Printer ‘Find a printer by other options’ page select ‘Add a printer using a TCP/IP address or hostname’ and click Next.
  2. Type the IP address of your Mesh Home Kit 1600 unit in both edit boxes on ‘Hostname or IP address:’ at the ‘Type a printer hostname or IP address page’, click Next. The IP address of the Mesh Home Kit 1600 Add-on can be found on the homepage of its web management interface (http://extender1600.local).
  3. Select “Standard” and “Generic Network Card” for the ‘Device Type’ and click Next.
  4. Select your printer on ‘Install the printer driver’ and follow the installation wizard.
Please ensure that the protective plastic cover is removed from the product and the product is not located in an enclosure or near a heat source or under direct sunlight.
Please keep the Reset button gently pressed (for instance by using a paperclip) at the back panel of your Mesh Home Kit 1600 unit until the LEDs get flashing.
Alternatively, Please press the Connect & Secure button for more than 15 seconds.
Please connect to the web management interface of your Mesh Home Kit 1600 unit, click on ADVENCED SETTINGS > IP Settings, select “Static”, type the IP address you want to set and click on “Save”.